cohost.blogg.se - Port forward for vulkano player

#PORT FORWARD FOR VULKANO PLAYER SOFTWARE#
#PORT FORWARD FOR VULKANO PLAYER MAC#

The device is lighter than we expected, and we were pleased not to notice any moving fans active during usage. Luckily the device doesn’t require line of site, so if you have an area you can tuck it away to, it can still function without issue. The Flow itself is 16 inches wide, 5 inches deep and 1 inch tall–not your standard dimensions for any other AV component. When we received the box, we knew the shape of the Vulkano Flow would be a bit unique, and we were not disappointed. 100V – 240V 50/60 Hz worldwide AC input (will need mechanical adapter socket for countries other than USA & Canada) External IR blaster cable plug in for setup where internal blaster doesn’t work.Internal IR blaster capability without need to connect IR blaster cable, which works in most setups.

IR Remote learning capability for audio-video device not in the database.

Used to remotely control the Audio-Video source device.

10/100/1000 Mbps Ethernet using standard Cat5e cable.

WiFi Protected Setup (WPS) for easy wireless network setup.

Note: These outputs are direct loop through from the inputs via splitters.

Note: The input signal video format is automatically detected.

System memory: 256MB DDR2 memory + 128MB NAND memory + 1MB EEPROM.

Processor: C2 Microsystem’s CC1203 System On Chip (SOC) based platform.

(Windows hosts only) Select NBNS (NetBIOS Name Service) and NBDS (NetBIOS Datagram Service) timeouts and retry settings. Select the number of seconds to keep trying if the NAT device cannot connect to the DNS server. Rotate sends one DNS request at a time and rotates through the DNS servers.īurst sends to three servers and waits for the first server to respond. Order sends one DNS request at a time in order of the name. If you have multiple DNS servers, select the strategy for choosing which server to send a request to. To add a DNS server to the list, deselect this check box and enter the IP address of the preferred and alternate DNS servers in the Select this option to detect the available DNS servers. (Windows hosts only) Configure the DNS servers for the virtual NAT device to use. If IPv6 is enabled, enter the IPv6 prefix that the NAT device uses. Important: Change this value only under the direction of VMware technical support.

Select the port to use to access status information about NAT. Select the number of minutes to keep the UDP mapping for the NAT.

#PORT FORWARD FOR VULKANO PLAYER MAC#

Select this setting if you change the organizationally unique identifier (OUI) portion of the MAC address for the virtual machine and subsequently cannot use NAT with the virtual machine.

To change settings for an existing port, select its name and click Properties.Īllow only passive mode FTP over the NAT device.Īllow any Organizationally Unique Identifier (Optional) You can use this text box to identify the forwarded service, for example, HTTP.

#PORT FORWARD FOR VULKANO PLAYER SOFTWARE#

It may be the standard port, such as 80 for HTTP, or a nonstandard port if software running in the virtual machine is configured to accept requests on a nonstandard port. The port number to use for requests on the specified virtual machine. The IP address of the virtual machine to which you want to forward the incoming requests. For example, incoming HTTP requests are usually on port 80. The number of the incoming TCP or UDP port.